Dolphin Pool Cleaners

In spite of the fact that technological advancements in automatic pool cleaners have been coming on droves in recent years, more people than ever are choosing to stay with a simple suction side model. However; the fact they they are so simple does leave them somewhat vulnerable to basic malfunctions from time to time. Fear not however, because all of the problems that commonly afflict suction side automatic pool cleaners usually have a simple remedy.

Not Covering Your Entire Pool

This is a common problem and it is easy to solve. The first thing to check is the hose that is running to the suction side automatic pool cleaner. Make sure that it is long enough and that means that it should extend the length of the pool and then some. If that is not the problem then the automatic pool cleaner may be simply following a current in your pool that is created by the water intake and outflow ports. To fix this, simply adjust the amount of flow that is coming out of each port until the autiomatic pool cleaner begins to traverse the pool in its entirety.

Loss of Pep – Limited Function

Your suction side automatic pool cleaner just isn’t working as enthusiastically as it did on the day that you brought it home. The first thing to check is the pump strainer basket and the filter, to see if they are clogged. Most of the time this is the problem. Then check to see of there is any debris caught in the unit itself. Then check the hose for debris caught up at its couplings. Finally, the last thing to check is the hose itself, to see if there are any cracks or holes in it.

Written by Francesca Conquesa. Find the best information on Dolphin automatic pool cleaner as well as Automatic pool cleaners

 

Suction side and pressure side automatic pool cleaners are still the most affordable type of pool cleaners out there. They function off of the power that they get from the pools pump, by water either being pumped to them or sucked through them. While it is a simple system, with the suction side automatic pool cleaners being the most simple, problems can arise from time to time and most of them have a simple solution.

Loss of Function

Most commonly, the source of this problem is a lack of water either going to or coming form the unit. The first place to check is the pump strainer basket and the pools filter, to see if either one or both of these are clogged up. If they aren’t, then the next place to check is the line itself and most notably at any couplings where debris will tend to clog. If nothing is there, then the next place to look is in the unit itself. If nothing is there, then it may turn out that your hose may have a hole or a crack in it.

Not Covering the Whole Pool

This is another common problem that is most usually caused by the hose running to the unit being too short. However; if this is not your case, particularly with a suction side automatic pool cleaner, the next thing to check is the amount of water going in and coming out of the pools water ports. Your suction side automatic pool cleaner a be following a current in the water that is created by these water ports in your pool. By simply adjusting the amount of water that is coming in and going out of each port, this current can be eliminated and your problem solved.

Written by Francesca Conquesa. Find the best information on Automatic pool cleaners as well as Dolphin pool cleaner